SWD8028 daahan polyaspartic anticorrosion
Tilmaamaha iyo faa'iidooyinka
* Cufnaanta sare ee cufnaanta hoose, oo leh heer wanaagsan, filimka daahan waa mid adag, cufan, iftiin buuxa iyo midabyo dhalaalaya
* Xoog xabag ah oo aad u fiican, oo si fiican ula jaan qaada polyurethane, epoxy iyo filim kale oo daahan.
* adkaanta sare, caabbinta xoqan wanaagsan iyo caabbinta wasakhda
* iska caabin aad u fiican, iska caabin saameyn leh
* hantida anticorrosion aad u fiican, iska caabin aashitada, alkali, milix iyo kuwa kale.
* midab lahayn, iska caabin UV, huruud la'aan, budo lahayn, iska caabin gabow, leh iska caabin cimilo oo aad u wanaagsan iyo dhaldhalaalka iyo hantida midabka
* si toos ah ayaa loogu dabaqi karaa dusha sare ee birta (DTM)
* Alaabtani waa mid deegaan ahaan u wanaagsan oo aan ka koobnayn dareerayaasha benzene iyo iskudhisyada rasaasta
Macluumaadka alaabta
| Shayga | Qayb | Qaybta B |
| Muuqashada | dareere huruud ah oo khafiif ah | Midabka la hagaajin karo |
| Cufisjiid gaar ah (g/m³) | 1.04 | 1.50 |
| Viscosity (cps)@25℃ | 40-60 | 100-200 |
| Waxyaabaha adag (%) | 58 | 90 |
| Saamiga isku dhafka ah (miisaan ahaan) | 1 | 1 |
| Waqtiga qallalan ee dusha sare (h) | 1 | |
| Nolosha dheriga (h)@25℃ | 1 | |
| Daboolista aragtida (DFT) | 0.15kg/㎡ dhumucda filimka 100μm | |
Guryaha jireed ee caadiga ah
| Shayga | Tijaabi heerka | Natiijooyinka |
| Qalin adag | H | |
| Awoodda xabagta (Mpa) saldhig bir ah | HG/T 3831-2006 | 9.3 |
| Xoogga koollada (Mpa) saldhig la taaban karo | HG/T 3831-2006 | 2.8 |
| Aan ka bixi karin | 2.1Mpa | |
| Tijaabada laablaabashada (Shaft cylindrical) | ≤1mm | |
| Iska caabbinta abrasion (750g/500r) mg | HG/T 3831-2006 | 5 |
| Iska caabinta saamaynta kg · cm | GB/T 1732 | 50 |
| Ka-hortagga gabowga, gabowga la dedejiyey 1000h | GB/T14522-1993 | Iftiin la'aan 1, talaalid 1 |
Iska caabin kiimikaad
| Iska caabbinta aysidhka 40% H2SO4 ama 10% HCI, 240h | Daxal la'aan, xumbo ma leh, diirka ma saarna |
| Iska caabbinta Alkali 40% NaOH, 240h | Daxal la'aan, xumbo ma leh, diirka ma saarna |
| Iska caabin milix ah 60g/L, 240h | Daxal la'aan, xumbo ma leh, diirka ma saarna |
| Iska caabin buufin milix ah 1000h | Daxal la'aan, xumbo ma leh, diirka ma saarna |
| Iska caabin saliid, saliid engine 240h | Daxal la'aan, xumbo ma leh, diirka ma saarna |
| Iska caabinta biyaha, 48h | Xumbo ma leh, ma laalaabteen, Midab beddelan ma jiro, diirka la'aan |
| (Fiiro gaar ah: Hantida kor ku xusan ee u adkaysata kiimikada waxaa lagu helaa iyadoo loo eegayo habka tijaabada GB/T9274-1988, tixraac kaliya. U fiirso saamaynta hawo-qaadista, daadinta iyo daadinta. Tijaabada quusitaanka madaxbannaan ayaa lagula talinayaa haddii loo baahdo xog kale oo gaar ah.) | |
Tilmaamaha codsiga
Buraashka gacanta, rullaluistemadka
Buufinta hawada, oo leh cadaadiska hawada 0.3-0.5Mpa
Buufin aan hawada lahayn, oo leh cadaadis buufin ah 15-20Mpa
Ku talinaya dft: 150-300μm
Inta udhaxaysa dib u habaynta: min 1saac, ugu badnaan 24saac
Waqtiga daawaynta alaabta
| heerkulka substrate | Waqtiga qallalan ee dusha sare | Taraafikada cagta | Waqti qallalan oo adag |
| +10 ℃ | 2h | 24h | 7d |
| +20 ℃ | 1.5h | 8h | 7d |
| +30 ℃ | 1h | 6h | 7d |
Fiiro gaar ah: wakhtiga daawaynta way ka duwan tahay xaalada deegaanka gaar ahaan marka heerkulka iyo qoyaanka qarada ahi isbedelaan.
Nolosha shelf
Heerkulka kaydinta deegaanka: 5-35 ℃
* Nolosha shelf waa laga bilaabo taariikhda wax soo saarka iyo xaaladda la xidhay
Qaybta A: 10 bilood Qaybta B: 10 bilood
* durbaanka xirmada si fiican u xir.
* Ku kaydi meel qabow oo hawo leh, ka fogow soo-gaadhista qorraxda.
Xidhmada: qaybta A: 25kg/fuusto, qaybta B: 25kg/fuusto.
